Use of Plastic Pipes in Gas Pipelines
South Africa’s gas industry is on the cusp of great growth and expansion in light of a potential global oversupply of shale gas. Locally, the Department of Energy has confirmed the potential development of regional gas-fields, which will lead to natural gas becoming a more important fuel in South Africa.
With the availability of natural gas in neighbouring countries, such as Mozambique and Namibia, and the discovery of offshore gas reserves in South Africa, the gas industry in South Africa is set to undergorapid expansion.
“In view of these developments, local plastic pipe manufacturers have to ensure that the pipes used in gas pipelines, have been manufactured according to stringent specifications and adhere to global standards,” says Jan Venter, Chief Executive Officer of the Southern African Plastic Pipe Manufacturers Association (“SAPPMA”).This non-profit association represents more than 80 % of the plastic pipe produced in South Africa and focuses its efforts on ensuring pipe systems that are correctly designed, leak-free and durable for long-term use, including the rehabilitation of old pipelines.
Natural gas is a clean-burning, more affordable and more secure source of fuel and is increasingly being looked at as an alternative source of energy for both domestic and industrial use.It burns cleaner than any other fossil fuel, emitting up to 70 % less carbon dioxide (CO2) than coal in electricity generation. A modern gas-fired power plant is also 40% more efficient than a coal-fired. Developing South Africa’s gas pipelines is expected to unlock significant socioeconomic and environmental benefits for the country.
According to Venter,pipes made from High Density Polyethylene (HDPE) are widely used for the distribution of natural gas as they have a well-documented inertness to both the external soil environment and to natural gas.
“Extensive testing has taken place over the last 45 years, confirming time and again that the long-term strength of plastic pipes are unaffected by natural gas and its common constituents – making them the ideal material to use in gas pipelines”, Venter said.
Venter has first-hand knowledge of the potential challenges of a pipeline and why it is crucial to ensure that the materials used are up to the task, as he was involved in installing the first gas pipeline in Mozambique using HDPE pipe.An 865 km cross-border, natural gas pipeline was later installed from the Temane gas fields in Mozambique to Sasol's synfuels plant at Secunda in the early 2000, also using HDPE pipe.
“Like water pipelines, gas pipelines are a long-term investment in infrastructureand the pipes and fittings used are therefore required to last in excess of 100 years. HDPE pipes offer numerous benefits for gas pipe installations, such as being lightweight and easy to handle, easy to join, available in a range of sizes and pressure ratings and have low frictional resistance, with hydraulic properties that remain virtually unchanged over its useful life, resulting in lower energy use and pumping costs”, he explains.Pipes ranging between20mm to 630mm (as per SANS 4437) are generally used in gas pipelines.
One of the biggest dangers of gas pipe lines, however, is the risk of Rapid Crack Propagation (RCP) - a rarebut significant catastrophic pipe failure that results in a rapidly progressing crack(typically >300 ft/sec) when a pressurizedpipeline is subjected to a sudden or intenseimpact. RCP can also be the result of a pre-existingflaw or crack in the pipe and can occurin most piping materials including steeland PVC pipes.
“RCP is a concern in piping systems that are used toconvey compressed gasses due to the fact that the rapid energydissipation from a compressed gas providesthe energy required to sustain crack growth,” Venter explains. For this reason, pipes bearing the SAPPMA mark are regularly tested to ensure that they meet and exceed industry standards.
SAPPMA has also recently formed a specific task team, headed up George Diliyannis (Technical Support Engineer at Safripol), who has been tasked with the specific focus of investigating the requirements of the current specification, compiling a guiding document and as an industry body, ultimately ensuring high standards of pipe manufacture and installation when it comes to gas installations.
Concludes Diliyannis: “The gas industry is fast growing and SAPPMA recognises that it has a responsibility in this regard. South Africa has adopted the latest proven ISO standards for gas pipelines made from HDPE. These standards cover materials, manufacturing, installation and testing. Specifiers and users should ensure that South Africa’s gas pipelines are manufactured and installed according to SANS 4437:2014 in order to ensure long term operational safety and pipeline integrity. Gas pipelines will increasingly become an important part of the country’s infrastructure. Extended working lifetimes and uninterrupted supply of gas are therefore essential and will only happen if the pipes and the pipelines are prime quality”.
Issued on behalf of SAPPMA by Aim Marketing & Communications Consultants